| 1. | Calibration tests are standard procedures applied to sensors not eliminated by screening tests .
校准试验是对筛选试验中未被淘汰的传感器进行试验的标准测试程序。 |
| 2. | During calibration test weights are compared with appropriate standards
校正过程中，测试砝码将与适当的标准进行比较。 |
| 3. | Calibration test equipment
校准检验置 |
| 4. | Inquiring into calibration test of standard steel bottle and calculation of total deformation value
标准钢瓶标定试验及全变形值计算探讨 |
| 5. | Specification for radio disturbance and immunity measuring apparatus and methods - radio disturbance and immunity measuring apparatus - antenna calibration test sites for 30 mhz to 1 000 mhz
无线电干扰和抗扰测量仪器和方法规范.无线电干扰和抗扰测量仪器. 30mhz至1000mhz的天线校准试验装置 |
| 6. | Specification for radio disturbance and immunity measuring apparatus and methods - part 1 - 5 : radio disturbance and immunity measuring apparatus - antenna calibration test sites for 30 mhz to 1 000 mhz
无线电干扰和抗扰的测量设备和方法的规范.第1 - 5部分:无线电干扰和抗扰的测量设备. 30 mhz至1 000 mhz的天线校正试验装置 |
| 7. | 5 . the methods of temperature - correcting on copper cylinders and copper spheres are discussed . the method of unitive temperature - correcting on plastic pressue - measuring elements is put forward for the first time . large quantities of quasi - dynamic calibration tests in different temperatures are carried out on the dropper - hammer hydraulic dynamic pressure calibration device and the unitive temperature - correcting formula which accords with the traditional correcting method is got
在落锤液压动标装置上组织了多批次的铜柱、铜球高低温准动态校准试验，探讨了建立温度误差统一修正公式的可行性，建立了测压铜球，测压铜柱符合我国传统修正方法的温度统一误差修正公式。 |
| 8. | In the paper , through the calibration test of ground load , the relationship between outputs of electrical resistance of strain gauges and the external load applied on the structure has been gotten , and then the load history can directly be deduced from the measured strain history . so the fatigue load can be compiled
本文所建立的应变法实测疲劳载荷，其主要方法是通过进行地面加载标定实验，确定所设计应变电桥输出量与结构上作用的外载荷之间的关系，再由实测应变历程直接得到载荷历程的方法。 |
| 9. | 3 . a series of quasi - dynamic calibration tests by varying the pressure pulse width for the < t > 3 . 5 x 8 . 75mm pillar copper cylinders and o 4 . 763mm copper spheres are done on the dropper - hammer hydraulic dynamic pressure calibration device . by means of data analysis , the regulations of pulse width ' s effect on the two types of plastic pressure - measuring elements are obtained
3利用落锤液压动标装置组织了3 . 5 8 . 75mm柱形铜柱、 4 . 763mm铜球的变脉宽准动态校准试验，通过试验数据处理，获得了两种型号塑性测压器件的脉宽影响规律。 |
